3-125
OPERATING YOUR VEHICLE
80SS5-01E
Warning and indicator messages
If there is a problem or warning regarding the parking sensor system, a message is dis-
played on the information display in the instrument cluster and a symbol blinks. If a mes-
sage is displayed, follow its instruction.
Message Symbol Probable cause and remedy
Two blinking lines in
a sensor location.
There may be a problem with the parking
sensor system.
Have your vehicle inspected by an autho-
rized SUZUKI dealer.
One blinking line in
a sensor location.
The indicated sensor is contaminated.
Wipe it clean with a soft cloth.
Rearview camera
(if equipped)
When the gearshift lever is shifted to “R”
position while the ignition switch is in “ON”
position or the ignition mode is ON, the
rearview camera system automatically
shows the view behind the vehicle on the
display.
WARNING
The distance viewed in the rearview
camera may differ from the actual
distance according to the condition
of road or the load the vehicle is car-
rying. Since the camera display area
is also limited, backing up by only
looking at the display may cause an
accident or a collision with an object.
The rearview camera cannot replace
the driver’s attention. The driver
alone is responsible for parking and
similar driving maneuvers.
• Use the rearview camera only to
provide driving assistance.
• Always drive carefully confirming
the safety of the rear and the sur-
rounding conditions by looking
directly with your eyes and using
the rear view mirror.
• Check that the tailgate is securely
closed when backing up.
To Next Page
Loading...
Need help?
General
