Synesso MVP Hydra Technical Manual

17
START UP
Start-Up Instrucons
1. Connect the water lines and the drain hose. Turn the water ON. Water will begin to ow into the brew
groups.
2. Ensure the heang element breaker switch is in the OFF posion. Then switch the red electronics On/O
switch to the ON posion. The machine’s auto-ll feature will acvate and the steam tank will begin lling.
3. The water level sight glass for the steam tank is located on the right side of the machine. As the tank lls,
the water level will rise in the sight glass and will automacally stop when the correct level is reached.
4. Bleed the group heads of air:
• Hold each brew group handle le unl the corresponding display reads M: shi each group head handle
le momentarily, (see pictures below) allow the group to run unl there is a steady ow of water. Shi
each group head right to turn o.
5.Wait unl the steam tank has stopped lling and the level in the sight glass reads at least ½ full. Turn the
heang element breaker to the ON or (1) posion. All the heang elements (brew and steam) are now ac-
vated.
Electronics Switch
ON: up posion, light
on
OFF: down posion,
light o
Heang Element Switch
ON: le posion (1)
OFF: right posion (0)
1 0
Machine Switches
Center Posion—At Rest Shi Le - Start or Advance
Hold Le - Changes M to MP to VP
Shi Right - O or Select Brew
Program

Synesso MVP Hydra Specifications

General

Brand	Synesso
Model	MVP Hydra
Category	Coffee Maker
Language	English