To Next Page

To Previous Page

This is the rst screen of the 2nd level menu, the save lockout screen.

Line 2 can prevent the user from changing between M, MP, and VP mode. It will lock to the current mode.

Note: The le mode lockout is available only with rmware v2.55 and above.

Line 3 can prevent the accidental use of save mode. When this seng is “locked”, holding right on the group

heads will not enter save mode.

The shot mers will blink a red error light at the operator if the mode trying to be accessed is in lockout.

To cycle to the next display screen, press the down buon.

On this screen, you can acvate or deacvate program storage posions 2 through 6. Program #1 cannot be

deacvated. Shiing right while not brewing a shot will cycle through any program save locaons currently

acve in numerical order. (1->2->5->1… as shown.) This seng is applied to all groups.

To cycle to the next display screen, press the down buon.

PROGRAMMING

Menu Level 2: Lockout

Menu Level 2: Programs

Home

Buon

4th Line Buon

Access to Menu Level 2:

There are 3 levels of menus a technician can access through the wired controller:

Menu level 1 (described on pages 39-43) contains sengs relevant to the day-to-day operaon of the ma-

chine.

Menu level 2 may be reached from level 1 and contains sengs relevant to technicians and machine owners.

To access menu level 2, rst press the home buon to return to the temperature overview screen. Next,

press and hold the home buon. Press and release the 4th line buon, then release the home buon.

Synesso MVP Hydra Technical Manual

Other manuals for Synesso MVP Hydra