3
Please WRITE your Serial Number & Oset Infor-
maon here. This can be found on the 2nd & 3rd
Menu Levels of the Display Controller. Have this
available BEFORE calling for service or technical
support.
S/N: ________________________________
The osets for this machine are:
BG1: _____°F / BG2:_____°F / BG3:_____°F
Steam Tank:_____°F
Factory Contract Informaon:
Synesso™ Inc.
5610 4th Ave South
Seale, WA 98108 - USA
Tel: +1.206.764.0600 / Fax: +1.206.764.0601
E-mail: info@synesso.com
Web: www.synesso.com
Twier: @SynessoFactory
Instagram: Synesso_factory
INTRODUCTION
Congratulaons on the purchase of your Synesso™ espresso machine. Please read this Owner’s Manual and
retain it in a safe locaon for future reference. If you have any quesons about your machine, please con-
tact Synesso™ and our knowledgeable sta will assist you
Included in the package with this machine you will nd the following:
• Thumb Drive containing the Owner’s Manual, MVP Series Video and other technical documents
• Pump/Motor Combinaon + hoses (3/8” compression ngs on all hoses)
• 8’ Flexible ¾” ID drain hose + hose clamp (aached)
• Fing, 1/4” male NPT x 90° x 3/8” Compression (if not CE)
• Accessory Package: Portalters (per customer specicaon), blind basket, Synesso™ 3 oz. (90ml) shot
glass, 4oz jar cleaning detergent, 58.4mm tamper, 4 rubber leg pads
• Electrical plugs are ONLY included on CSA Cered machines (Canada). For all other machines, the
owner of the machine must purchase an appropriate plug end for their machine. Please see the electri-
cal requirements starng on page 10 for more informaon.
Serial Number
Your espresso machine has a unique serial number, located on the le inner frame of the machine, just
under the drain tray on a serial plate. The number can also be read on the display during start-up. Please
have this serial number available for reference when contacng the factory.
This manual applies to Synesso™ models: MVP and MVP Hydra machines. The MVP machines can be con-
gured to operate any group head as manual, manual with a program and full volumetric with a program
that includes adjustable total water volume. The MVP Hydra machines have an individual pump and motor
per group head and come standard with bypass hardware and a pressure regulator to create 4 stage pres-
sure ramping.
To Next Page
Loading...
Need help?
General
