Takeuchi TB225 User Manual

2-46
CONTROLS
LEVERS AND PEDALS
SAFETY LOCK LEVER
• Before standing up from the operator’s
seat to, for example, adjust the
operator’s seat, lower the working
equipment to the ground, raise the
safety lock lever to engage the lock and
stop the engine. If any controls should
be accidentally touched when the safety
lock lever is lowered (unlocked), the
machine will suddenly move and cause
serious injury or death.
• Note that the dozer blade and crawler
width switch controls cannot be locked,
even when the safety lock lever is set to
the locked position.
Do not carelessly touch these controls.
• Be careful not to touch the operating
levers when raising or lowering the
safety lock lever.
• Before leaving the operator’s seat, lower
the working equipment to the ground,
raise the safety lock lever to engage the
lock and stop the engine. Also, be sure
to remove the key, lock the door and
covers, take it with you and store it in a
specified place.
LEVERS AND PEDALS
This device is for locking the hoe attachment,
slewing and traveling.
When the lever is raised, the lever stand
springs up and the controls are locked.
Safety start function
When the lever is in the unlock position, the
engine cannot be started.

Takeuchi TB225 Specifications

General

Brand	Takeuchi
Model	TB225
Category	Excavators
Language	English