3-15
OPERATION
STOPPING TRAVEL
• Park the machine on a flat, rigid and
safe ground. Set the parking brake. If
you must park on a slope, chock the
tracks to block the machine.
• If any control is accidentally touched
when the safety lock lever is not locked,
the machine may suddenly move and
cause serious injury or death.
• Note that the dozer blade and crawler
width switch controls cannot be locked,
even when the safety lock lever is set to
the locked position.
Do not carelessly touch these controls.
Never stop running the machine suddenly
except in emergency. Stop in good time,
if possible.
1. Set the left and right travel levers slowly to
the neutral position. The machine stops.
OPERATING THE MACHINE
To Next Page
Loading...
Need help?
General
