2-15
CONTROLS
SEAT AND SEAT BELT
SEAT BELT
Be sure to fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1. Adjust the seat to the desired position for
operation, sit up and sit back in the seat.
2. Slowly pull out the seat belt to the desired
length.
If pulled out too rapidly, the belt is
automatically locked. If this occurs, release
the belt and slowly pull the belt again.
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
4. Check if the belt is securely locked by
pulling it, and arrange the belt around your
waist.
Releasing the seat belt
1. Grasp the tongue plate (A) and press the
button (C) on the buckle (B).
The seat belt retracts back into its original
position.
To Next Page
Loading...
Need help?
General
