Takeuchi TB225 User Manual

2-37
CONTROLS
SWITCHES
STARTER SWITCH
SWITCHES
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
OFF ......... Position for stopping the engine
and inserting or removing the key.
ON .......... Position in which the engine is
running. At this position, all the
electrical equipment is functional.
When the coolant temperature is
too low, the engine is
automatically preheated.
START ..... Position for starting the engine.
When the key is released, the
switch automatically returns to the
ON position.
BATTERY SWITCH
IMPORTANT: Never set this switch to the
OFF (O) position while the engine is
running. Doing so will cause the engine
and the electrical circuits to fail.
OFF (O) .... Cut off the electrical circuit. Be
sure to set this switch to the OFF
(O) position when storing the
machine for a long period, or
when performing maintenance of
the electrical system.
ON ( I ) ..... Connects the electrical system.
Check that this switch is in the
ON ( I ) position before starting the
engine.
Note: Setting this switch to the OFF (O)
position will shut down all electrical circuits,
but the memory of the radio preset tuning
keys will be retained.
Note: Setting this switch to the OFF (O)
position will reset the clock in the instrument
cluster. Set the clock again.
Refer to “Time setting (CLOCK)” on page
2-26.

Takeuchi TB225 Specifications

General

Brand	Takeuchi
Model	TB225
Category	Excavators
Language	English