Takeuchi TB225 User Manual

2-6
CONTROLS
COVERS
STARTER KEY
COVERS
The starter key is used to start and stop the
engine, as well as to lock and unlock the
following components:
• Cab door
• Manual storage compartment
• Engine hood
• Covers
SIDE COVER
• Before opening the side cover, be sure
to set the safety lock lever to the locked
position and stop the engine.
• When opening the side cover, open it all
the way to the position where it is
securely stopped.
• When opening and closing the side
cover, be careful not to get your hands
or other parts of your body caught by
the cover.
Open this cover when performing inspection
and maintenance of the hydraulic oil system
or batteries, or when adding fuel. The grease
gun holder is stored under this cover.
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the side cover
(1).
2. Push in the key (2) hole with your thumb
and open the side cover (1).
Closing
1. Support the side cover (1) by hand and
release the stay (3).
2. Close the side cover (1).
3. Insert the starter key and turn it clockwise
to lock the side cover (1).

Takeuchi TB225 Specifications

General

Brand	Takeuchi
Model	TB225
Category	Excavators
Language	English