Takeuchi TB225 User Manual

2-43
CONTROLS
WASHER SWITCH
ON .....Pressing the ON side of the switch
causes the washer to spray washer
fluid. To stop spraying, release the
switch.
AUTOMATIC DECELERATION SWITCH
When the ON side of the switch is pressed,
the deceleration lamp in the instrument
cluster flashes. This flashing stops when the
deceleration function starts working, and the
lamp remains lit while in the deceleration
mode. The engine speed automatically drops
to low idle (deceleration mode) four seconds
after the control levers are set to neutral, to
reduce fuel consumption. Moving the control
levers will cause the speed to return to the
original engine speed.
Switching from the deceleration button to the
auto-deceleration switch will first return to
the engine speed set with the throttle
controller. Then, the engine will automatically
enter the deceleration mode (low idling) if the
control levers are not operated within four
seconds.
SWITCHES

Takeuchi TB225 Specifications

General

Brand	Takeuchi
Model	TB225
Category	Excavators
Language	English