GTS Technical Manual
19. April 2010 Edition: V1.00/2010 5-19
Copyright © 2010, Diversey Inc.
05.0 swingo 1255 B Power - mechanics.fm
5.1.4.3 Replacing of filter 24V
Picture 19: Filter 24V
Remove
• Remove filter cover of filter 24V.
Ensure that no water is in the fresh water system before you
disconnect the hoses or remove the filter cover.
• Remove fixation screws (08/124) from chassis.
• Thread out filter 24V from the chassis.
• Disconnect the fresh water connection.
• Disconnect the wires from coil.
• Remove complete filter 24V.
Mount
• Take new filter 24V.
• Connect wires to coil.
• Connect fresh water hoses to the filter 24V.
• Thread in the filter 24V on the chassis.
• Position fixation screws and tighten them.
• Position filter cover on the filter 24V.