13
2 SETUP
DMS-CTC-20140127-0004 v1.0
2 Setup
Setup procedure
Complete the following steps to setup the Gateway:
1 Connect your Gateway to your service provider’s network.
For more information, see “2.1 Connect the Gateway to your service provider’s network” on page 14.
2 Power on the Gateway.
For more information, see “2.2 Power on the Gateway” on page 15.
3 Connect your wired devices to the Gateway.
For more information, see “2.3 Connect your wired devices” on page 16.
4 Connect your wireless devices to the Gateway.
For more information, see “2.4 Connect your wireless devices” on page 17.
5 Connect your phones.
For more information, see “2.5 How to connect your phone” on page 27.
Optional configuration
After completing the setup procedure, the Gateway is ready for use. Optionally, you can further configure the Gateway to your
needs (for example, change the wireless security) using the Gateway’s Admin Tool.
For more information, see “3 Admin Tool” on page 25.
To Next Page
Loading...
Need help?
General
