25
3 ADMIN TOOL
DMS-CTC-20140127-0004 v1.0
3 Admin Tool
Introduction
The Admin Tool allows you to configure the settings of your Gateway via your web browser.
Requirements
JavaScript must be enabled on your browser (this is the default setting). For more information, consult the help of your web
browser.
Accessing the Admin Tool
Proceed as follows:
1 Open your web browser and browse to http://192.168.0.1.
2 The Gateway prompts you to enter the user name and password. Enter your user name (default: admin) and password
(default: password) and click OK.
3 The Admin Tool appears.
On Windows it is also possible to access the Admin Tool using UPnP. For more information, see “7.1.1 UPnP” on
page 56.
192.168.0.1 is the default IP address of the Gateway. If at some point you changed the IP address of the Gateway,
use the new IP address instead.