17
2 SETUP
DMS-CTC-20140127-0004 v1.0
2.4 Connect your wireless devices
Introduction
The Gateway has two access points that allows you to connect wireless devices to your home network:
The 5 GHz (3x3) IEEE 802.11ac access point offers superior transfer rates, is less sensitive to interference and allows you to
connect IEEE802.11a/n/ac wireless clients.
The 2.4 GHz (3x3) IEEE 802.11n access point allows you to connect IEEE802.11b/g/n wireless clients. Use this access point for
wireless clients that don’t support 5 GHz.
Procedure
To connect your device via:
Via WPS, proceed with “2.4.1 How to connect your wireless client via WPS” on page 18.
By manually entering the settings, proceed with “2.4.2 How to manually connect your wireless client” on page 20.
If you want to connect your wireless client to the 5 GHz access point, make sure that your wireless client supports
5 GHz connections.
To Next Page
Loading...
Need help?
General
