PROGRAM DISKs includedinthe replacement parts. For details on programming, see
“After replacing the PROGRAM ROM (IC16/IC17) ” .
The CUSTOM DATA ROM stores RHYTHM & ACCOMP data for the RHYTHM GROUP/
CUSTOM function. The initial RHYTHM & ACCOMP data is factory-set in the CUSTOM
DATA ROM at the time of shipping. The CUSTOM DATA ROM can also store
COMPOSERdatathat the user creates. However, user-data is lost when the CUSTOM
DATA ROM is replaced. After replacing the CUSTOM DATA ROM, default the data in it
with the INITIAL DATA DISK attached to this product. For details on defaulting, see
“After replacing the CUSTOM DATA ROM (IC18) ”.
9.3. About the replacement parts
The same FLASH ROM with a available memory can be used for the PROGRAM ROMs
(IC16/IC17). Moreover, the included PROGRAM DISKs contains all programs.
Therefore, the replacement parts can be used for IC16 and IC17.
9.4. How to write program/data into FLASH ROMs
9.4.1. After replacing the PROGRAM ROM (IC16/IC17)
1. Set the PROGRAM DISK 1 included in the replacement parts into the Floppy Disk
Drive.
2. Hold down the PANEL MEMORY buttons 1 , 2 , 3 and 4. And turn on the power
switch. (refer to Fig.34 )
Fig.34
39
To Next Page
Loading...
Need help?
General
