B-1
Appendix B Battery Module
For the absolute encoder, JSDAP series has an optional battery module, which is divided into
two parts of the battery and installation, described as below.
Battery Specification
NO. ITEMS Characteristics
1
Nominal Capacity
2400 mAh (Continuosly discharged under 2mA current till 2.0V
end-point voltage at the temperature of 23℃±3℃)
2
Nominal Voltage
3.6V
3
Operating Temperature Range
-40~+85℃
4
Max. Continuos Discharge
Current
100mA
5
Structures
Thiony chloride, lithium anode, acetylene black, separator, and
stainless steel cell shell etc.
6
Weight for reference
19.0g
Installation
When customers received the battery modules, battery and casing has been installed properly, please refer to
the following steps to install.
a. The drive has a black lightning symbol protective cover, such as the circle marked.
To Next Page
Loading...
Need help?
General
