Maintenance—2230 Service
Table 6-24
Maintenance Aids
Description
Specification Usage Example
1. Soldering Iron
15 to 25 W.
General soldering and unsoldering. Antex Precision Model C.
2. Torx Screwdriver Tips
Torx tips: #T7, #T9,
Assembly and disassembly. Tektronix Part Numbers:
and Handle
#T10, #T15, and #T20.
Handle: 1/4 inch hex drive.
#T7 003-1293-00
#T9 003-0965-00
#T10 003-0814-00
#T15 003-0966-00
#T20 003-0866-00.
Handles:
8 1/2 in. 003-0293-00
3 1/2 in. 003-0445-00.
3. Nutdrivers 1/4 inch, 5/16 inch, 1/2
inch, and 9/16 inch.
Assembly and disassembly.
Xcelite #8, #10, #16,
and #18.
4. Open-end Wrench 9/16 inch and 1/2 inch.
Channel Input and Ext Trig BNC
Connectors.
Tektronix Part Numbers:
9/16 003-0502-00 .
1/2 003-0822-00.
5. Hex Wrenches
0.050 inch, 1/16 inch.
Assembly and disassembly.
Allen Wrenches.
6. Long-nose Pliers
Component removal and replacement.
Diamalloy Model LN55-3.
7. Diagonal Cutters
Component removal and replacement.
Diamalloy Model M554-3.
8. Vacuum Solder
Extractor
No static charge retention.
Unsoldering static sensitive devices
and components on multilayer boards.
Pace Model PC-10.
9. Contact Cleaner No-Noise R.
Switch and pot cleaning.
Tektronix Part Number
006-0442-02.
10. Pin-Replacement Kit
Replace circuit board connector pins.
Tektronix Part Number â–
040-0542-01.
11. IC-Removal Tool
Removing DIP 1C packages. Augat T il4-1.
12. Isopropyl Alcohol
Reagent grade.
Cleaning attenuator and front panel
assemblies.
2-lsopropanol.
13. Isolation Transformer
Isolate the instrument from the ac
power source for safely.
Tektronix Part Number
006-5953-00.
14. IX Probe Power supply ripple check. TEKTRONIX P6101A.
15. Bayonet Ground
Signal interconnect for power supply
Tektronix Part Number
Assembly
ripple check.
013-0085-00.
16. LED Dip Clip
Troubleshooting. HP 548A.
6-32
REV MAY 1987
To Next Page
Loading...
Need help?
General
