Tektronix AFG3000 Series User Manual

Getting Acquainted with Your Instrument
24 AFG3000 Series Quick Start User Manual
Shortcut Buttons
Shortcut buttons are provided for experienced users. The shortcut buttons allow you to select a setup parameter and enter
a numeric value using the front panel controls. By using the shortcut buttons, you can select a waveform parameter without
using any bezel menu selection.
Quick Tips
■ If you push the Phase | Delay shortcut button, Delay becomes active. Pushing Phase | Delay again will have no effect,
because there is no phase parameter in the pulse parameter menu.
■ The Duty/Width and Leading/Trailing shortcut buttons are functional only when the instrument is in the pulse
parameter menu.
1. Shortcut buttons are located below the
Run Mode buttons on the front panel.
In this example, use pulse waveform.
2. If you push the Amplitude/High short-
cut button once, Amplitude becomes
active.
3. If you push the Amplitude/High short-
cut button again, High Level becomes
active.
You can also set parameters for
Frequency/Period, Offset/Low,
Duty/Width, or Leading/Trailing in the
same way.
1
2
3

Tektronix AFG3000 Series Specifications

General

Brand	Tektronix
Model	AFG3000 Series
Category	Portable Generator
Language	English