Specifications
AFG3000 Series Quick Start User Manual
71
General
System Characteristics
Warm-up Time, typical 20 minutes minimum
Power On Self Calibration, typical <16 s
Configuration Times, typical USB LAN GPIB
Function Change 95 ms 103 ms 84 ms
Frequency Change 2 ms 19 ms 2 ms
Amplitude Change 60 ms 67 ms 52 ms
Select User Arb 88 ms 120 ms 100 ms
Data Download, typical 4000 points waveform data
GPIB: 42 ms
USB: 20 ms
LAN: 84 ms
Acoustic Noise, typical <50 dBA
Weight (approximate) 4.5 kg
Power
Source Voltage and Frequency 100 V to 240 V, 47 Hz to 63 Hz
115 V, 360 Hz to 440 Hz
Power Consumption Less than 120 W
Environmental, EMC, Safety
Temperature Range
Operating 0 ° C to +50 ° C
Nonoperating –30 °C to +70 ° C
Humidity
Operating At or below +40 ° C: ≤ 80%
>+40 ° C to +50 ° C: ≤ 60%
Altitude
Operating Up to 3,000 meters (10,000 feet)
EMC Compliance
European Union EN 61326 Class A
1, 2
EN 61000-3-2, and EN 61000-3-3
IEC 61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-11
1. Emissions that exceed the levels required by this standard may occur when this equipment is connected to a test object.
2. To ensure compliance to the standards listed above, attach only high quality shielded cables to this instrument. High quality shielded cables
typically are braid and foil types that have low impedance connection to shielded connectors at both ends.
Australia AS/NZS 2064
Safety UL 61010-1:2004
CAN/CSA C22.2 No. 61010-1:2004
IEC 61010-1:2001
To Next Page
Loading...
Need help?
General
