Tektronix AFG3000 Series User Manual

Operating Basics
AFG3000 Series Quick Start User Manual
51
Add Signal (AFG3100 and AFG3200 Series)
The AFG3101/AFG3102 and AFG3251/AFG3252 rear panel ADD INPUT connector allows you to add an external signal
to the CH1 output signal.
1. Connect an external signal source to
the rear panel ADD INPUT connector.
2. Push the front-panel Top Menu
button, and then push the Output
Menu bezel button.
3. The Output Menu is displayed.
4. Push External Add to select On.
5. Push the front-panel CH1 Output
button to enable the output. The
Output Status (see page 22) is
changed from Output Off to Ext Add.
120
VA
1
2
3
4
5

Tektronix AFG3000 Series Specifications

General

Brand	Tektronix
Model	AFG3000 Series
Category	Portable Generator
Language	English