Operating Basics
34 AFG3000 Series Quick Start User Manual
Generate an Arbitrary Waveform
The arbitrary/function generator can output an arbitrary waveform that is stored in the internal memory or a USB memory.
Quick Tips
■ File names are displayed only in English characters. If you use non-English characters to name a file, these characters
are replaced by Roman symbols such as #, $, %.
■ Use the Write to... bezel menu in the Edit menu to copy a waveform file on the USB memory to the internal memory.
1. Push the front-panel Arb button.
2. Push the Arb Waveform Menu bezel
button.
3. The Arb Waveform Menu is displayed.
You can now browse a list of waveform
files in the internal memory or USB
memory.
Select Internal. You can specify a file
from User 1 through User 4, or Edit
Memory.
Use the front panel general purpose
knob to scroll the files, then select a file
and push OK.
4. When USB is selected, the instrument
lists a directory of the folders and files
on the USB memory.
You can select a folder or file using the
knob to scroll up and down the list. To
open a folder, push the Change Direc-
tory bezel button. To open a file, push
OK.
To return to the upper directory, first
select the <Up Directory> icon, and
then push the Change Directory bezel
button.
1
2
3
4
To Next Page
Loading...
Need help?
General
