Tektronix MDO4104-3 User Manual

Appendix B: TPP0
500 and TPP1000 500 MHz and 1 GHz 10X Passive Probes Information
Appendix B: TP
P0500 and TPP1000 500 MHz and 1 GHz 10X
Passive Probes Information
Operating Information
The TPP0500 and TPP1000 10X Passive Probes are compact passive probes with 10X attenuation that are designed for use
with Tektronix MDO4000 Series oscilloscopes.
The probes have no user- or Tektronix-serviceable parts.
Connecting the Probe to the Oscilloscope
Connect th
e probe as shown in the illustrations below.
Compensating the Probe with MDO4000 Series Oscilloscopes
For information on compensating the probe, refer to the related section earlier in this manual.
(See page 12, Compensating a TPP0500 or TPP1000 Passive Voltage Probe.)
Standard Accessories
The standard accessories included with the probe are shown below.
WARNING. To avoid electric shock when using the probe or accessories, keep fingers behind the finger guard of probe
body and accessories.
To reduce risk of shock, when using the probe on floating m easurements, ensure the reference lead accessories are fully
mated before connecting the probe to the circuit under test.
184 MDO4000 Series Oscilloscopes User Manual

Tektronix MDO4104-3 Specifications

General

Brand	Tektronix
Model	MDO4104-3
Category	Test Equipment
Language	English