Roll mode tips
■
Push Run/Stop to halt Roll mode.
■
Roll mode is disabled under the following conditions:
■
When using Reference, Math, or FFT waveforms
■
Using the Zoom and Search function
■
Taking measurements (Measure menu)
■
When trigger mode is changed to Normal
■
When horizontal scale is set to 40 ms/division or higher (for 5 M record
lengths, this is limited to 400 ms/division or higher)
NOTE. The Average acquisition mode is unavailable when you are using Roll
mode.
Acquisition setup
TBS2000B Series Oscilloscopes User Manual 79
To Next Page
Loading...
Need help?
General
