Tektronix TBS2204B User Manual

Recalling data
The oscilloscope provides permanent internal memory locations from which you
can recall instrument setups and waveforms. You can also recall (load) setups
and waveforms from files on an external USB drive.
Recalling oscilloscope setup information
Use this procedure to recall (load) oscilloscope settings from a memory location
or external file and set the oscilloscope to those settings.
You can recall (load) saved setup data to quickly configure the oscilloscope to
take a certain measurement. A setup file contains most of the oscilloscope
settings, including vertical, horizontal, trigger, cursor, and measurement
parameters. It does not include communications information, such as GPIB or
LAN configuration.
1. (Optional) Install a USB drive to recall the setup data from a file on the USB
drive.
2. Push the Save/Recall front-panel button.
3. Push the Action side-menu button.
4. Use the Multipurpose knob to select and click Recall Setup.
5. To recall setup data from internal setup memory:
a. Push the Recall From side-menu button.
b. Select and click Setup.
TBS2000B Series Oscilloscopes User Manual 135

Tektronix TBS2204B Specifications

General

Brand	Tektronix
Model	TBS2204B
Category	Test Equipment
Language	English