Tektronix TBS2204B User Manual

Setting the oscilloscope to factory default values - Default Setup
Default Setup clears the current oscilloscope settings and loads factory-defined
settings. This lets you quickly reset the oscilloscope to a known state before
setting up to take a new measurement.
See Setting the oscilloscope to factory default values - Default Setup on page 80.
To return the oscilloscope to its factory default settings:
1. Push Default Setup.
2. If you change your mind, push Undo Default Setup side-menu button to
return the oscilloscope to the settings present before you pushed Default
Setup. You must push this button before doing any other action.
Acquisition setup
80 TBS2000B Series Oscilloscopes User Manual

Tektronix TBS2204B Specifications

General

Brand	Tektronix
Model	TBS2204B
Category	Test Equipment
Language	English