To Next Page

To Previous Page

Appendix A: Specifications

A-24

CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual

Table A- 4: Trigger specifications

Characteristic Description

Trigger jitter, typical

CSA7404, CSA7154, TDS7404,

TDS7254, & TDS7154

6 ps rms for low frequency, fast rise time signal

TDS7104 & TDS7054 σ =8ps

TDS6604 & TDS6404 Internal: 7ps rms for low frequency square wave with 5 div amplitude, fast rise time

<200 ps, repetition rate <10 kHz

Auxiliary: 10ps rms for 5 V step signal with rise time <2 ns and repetit ion rate

<10 kHz

n Edge Trigger Sensitivity

CSA7404, CSA7154, TDS7404,

TDS7254, TDS7154,

TDS6604, & TDS6404

All sources, for vert ical scale settings ≥10 mV/div and ≤1V/div

Trigger Source Sensitivity

Main trigger, DC coupled ≤0.5 div from DC to 50 MHz

CSA7404, TDS7404,

TDS6604, & TDS6404:

≤1.5 div at 3 GHz

CSA7154: & TDS7154

≤1 div at 1.5 GHz

Delayed trigger, DC coupled ≤0.5 div from DC to 50 MHz, increasing

to1divat1.5GHz

Auxiliary input, DC coupled ≤250 mV from DC to 50 MHz, increas-

ing to 350 mV at 500 MHz

TDS7054 Any channel, DC coupled 0.35 div from DC to 50 MHz, increasing

to 1 div at 500 MHz

Auxiliary input 400 mV from DC to 50 MHz, increasing

to 750 mV at 100 MHz

TDS7104 Any channel, DC coupled 0.35 div from DC to 50 MHz, increasing

to1divat1GHz

Auxiliary input 250 mV from DC to 50 MHz, increasing

to 500 mV at 100 MHz

Tektronix TDS7054 User Manual

Other manuals for Tektronix TDS7054