CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual
2-11
Rear Panel I/O Map
RJ-45 connector to connect to network
Removable hard disk drive to provide
individual environment for each user or to
secure data. Press to release
USB connector for mouse or
keyboard and mouse
COM1 serial port
Upper VGA port to connect a
monitor for side-by-side display
Lower VGA port to connect a
monitor for instrument display
PS-2 connectors for mouse and keyboard
Parallel port (Centronics) to
connect printer or other device
GPIB port to connect to controller
PCMCIA slots for two type-1 cards,
two type-2 cards, or one type-3 card
CDROM-RW drive accessible from
Windows. Press to open
Connectors for speaker and microphone
CSA7000 Series: Auxiliary (external
trigger) input. Auxiliary (trigger) output
signal. Analog (CH 3) signal output; scale
and offset controlled by CH3 controls.
External reference input and internal
reference output
TDS7000 Series & TDS6000 Series:
External reference input and internal
reference output
To Next Page
Loading...
Need help?
General
