Field Description
• -(% (default value): Ethernet over ATM
(EthoA) is used for the ATM connection (Permanent Virtual
Circuit, PVC).
• @3 ",# -(%: Routed Protocols over
ATM (RPoA) is used for the ATM connection (Permanent Vir-
tual Circuit, PVC).
• -(%: PPP over ATM (PPPoA) is used for the ATM
connection (Permanent Virtual Circuit, PVC).
Virtual Path Identifier
(VPI)
Only for Provider = 0#!
Enter the VPI value of the ATM connection. The VPI is the iden-
tification number of the virtual path to be used. Note your pro-
vider's instructions.
Possible values are to .
The default value is .
Virtual Channel Identi-
fier (VCI)
Only for Provider = 0#!
Enter the VCI value of the ATM connection. The VCI is the iden-
tification number of the virtual channel. A virtual channel is the
logical connection for the transport of ATM cells between two or
more points. Note your provider's instructions.
Possible values are $ to $.
The default value is 32.
Encapsulation Only for Provider = 0#!
Select the encapsulation to be used. Note your provider's in-
structions.
Possible values (in accordance with RFC 2684):
• //2 = 92* (Default value for Ethernet over ATM
: Is only displayed for Type = -(%.
Bridged Ethernet with LLC/SNAP encapsulation without
Frame Check Sequence (checksums).
• //2 = 92*: only displayed for Type =
-(%.
17 WAN Teldat GmbH
306 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
