Teldat bintec RT1202 User Manual

in succession until a rule matches. If overlapping occurs, i.e. more than one filter rule
matches a packet, only the first rule is executed. This means that if the first rule denies a
packet, whereas a later rule allows it, the packet is rejected. A deny rule also has no effect
if a relevant packet has previously been allowed by another filter rule.
A list of all configured filter rules is displayed in the Firewall->Policies->Filter Rules
menu.
Fig. 146: Firewall->Policies->Filter Rules
You can use the button to insert another policy above the list entry. The configuration
menu for creating a new policy opens.
You can use the button to move the list entry. A dialog box opens, in which you can se-
lect the position to which the policy is to be moved.
19.1.1.1 New
Choose the New button to create additional parameters.
Fig. 147: Firewall->Policies->Filter Rules->New
The menu Firewall->Policies->Filter Rules->New consists of the following fields:
Fields in the Basic Parameters menu.
Teldat GmbH
19 Firewall
bintec Rxxx2/RTxxx2 385

Teldat bintec RT1202 Specifications

General

Brand	Teldat
Model	bintec RT1202
Category	Gateway
Language	English