42
5.3 WiFi signal strength
In this module, you can adjust the wall-penetration capability and wireless coverage of the router.
Not all routers support this function. The actual product prevails.
To access the configuration page, log in to the web UI of the router and navigate to the Wireless
Settings > WiFi Signal Strength.
Parameter description
The mode of signal strength. The default mode is High.
⚫
High: It is typically used to meet wireless coverage requirements in large or multi-barrier
environments.
⚫
Medium: It is typically used to meet wireless coverage requirements in medium-area or
less-obstacle environments.
⚫
Low: It is typically used to meet wireless coverage requirements in small area or barrier-
free environments.
If the WiFi function works properly in low mode, you are recommended to select the low
mode.