20
The guidance view
The guidance view is used to guide you along the route to your destination. The guidance view is
shown when you start driving. You see your current location and details along your route,
including 3D buildings in some cities.
Note: 3D buildings in guidance view are not available in all countries and only available in
selected cities.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of
travel, change the 2D and 3D default settings.
Tip: When you have planned a route and the 3D guidance view is shown, select the switch view
button to change to the map view and use the interactive features.
When your PRO starts after sleeping and you have a route planned, you are shown the guidance
view with your current location.
1. WEBFLEET panel. The WEBFLEET panel is shown when you are using the WEBFLEET fleet
management solution.
2. Switch view button. Select the switch view button to change between the map view and the
guidance view. When in guidance view, if you are driving, the small arrow rotates to show
your current compass bearing relative to north, with north being up
3. Zoom buttons. Select the zoom buttons to zoom in and out.
Tip: You can also pinch to zoom in and out.
To Next Page
Loading...
Need help?
General
