7
Home Screen Messages
A
Title Bar
HOME
e battery icon indicates that the controller’s VAC power is o and
HOME
01:09PM
WED
01/08
NEXT START 06:00AM
ALERT: PRESS HELP
B
C
A
the timer is running under battery power.
Note: e 9-VDC battery is used to allow programming, but
will not activate any valves when the VAC power supply is o.
B
Main Display
01:09PM
TUES
01/08
Displays the current time, day of the week and date.
SCHEDULE A/B/C OR AUX
Indicates which schedule (A, B or C) or auxiliary is associated with the displayed status. If only Schedule
A is active, EVOLUTION
®
AG
will not display the Schedule “A”, “B” and “C” or AUX. If an
is
displayed to the left of the schedule name, then additional schedules are active and can be viewed by
pressing the Down arrow.
NEXT START 06:00AM
Note: e scroll down arrow
indicates that additional information is available.
Use the Down arrow to reveal the additional message(s).
SCHEDULE A LOOPING
e displayed schedule type is set to Looping. e Looping option is set in SCHEDULES/TYPE.
NOT WATERING TODAY
e displayed schedule will not water that day.
NOT ACTIVE TODAY
e displayed auxiliary schedule (AUX) will not activate that day.
VALVE1 00:05
Valve 1 is active with a 5 minute remaining runtime. Pressing the Right arrow will deactivate the
running valve and activate the next valve (if additional valves are scheduled) in the schedule regardless of
the remaining runtime.
WATERING COMPLETE
e displayed schedule completed its watering cycle.
SCHEDULE COMPLETE
e displayed auxiliary schedule (AUX) completed its cycle.
NEXT START 06:00AM
e next start time of the displayed watering schedule.
DELAY 00:05
e controller is performing a valve delay before the next valve in the schedule is activated. e valve
delay is set in the Schedule Details under the Advanced menu.
PULSE DELAY 00:05
e active valve is performing a Pulse Delay (soak) before continuing operation. e Pulse Delay is set
in the Valve Details under the Advanced menu.
RAIN HOLD
e rain sensor is activated and the schedule is delayed until the rain sensor dries out.
RAIN HOLD 02 DAYS
If Dryout Days is set, the controller will indicate Rain Hold until the number of Dryout Days are
completed. Pressing the Right arrow will deactivate the Dryout Days and the Schedule(s) will
continue normal operation.
C
Message Bar
ALERT: PRESS HELP
e controller detected a condition that needs user attention. Check the alert messages in the Alerts
menu under the Help/Setup function. For a list of the Alert messages and descriptions, please refer to
the Alerts section.
WATER OFF 04 DAYS
Scheduled watering has been suspended for the indicated days. Watering can be turned o from: 1–14
days, Remains O, or operate at the Next Scheduled Start.
SYSTEM OK
e system is functioning as expected.
To Next Page
Loading...
Need help?
General
