Toro EVOLUTION User Manual

26
Factory Reset
Select this function to reset the controller to the factory default parameters. Schedule B, C and Auxiliary will be disabled and all of their
parameters will be cleared or set to OFF. Schedule A will be set with a WEEKDAY schedule with all 7 days active. It will have one start time
set to OFF and all valve runtimes set to OFF.
FACTORY RESET
RESET TO FACTORY
DEFAULTS? YES
Help/Setup
Language
e EVOLUTION
®
AG controller provides a quick way to switch the user interface from English to Spanish. Select LANGUAGE and
press SELECT to quickly switch.
Note: When another language other than English is selected in the LANGUAGE menu inside PREFERENCES, that language and
English will become the selection.
Alerts
e EVOLUTION
®
AG controller always checks the system for proper function and it will provide feedback if it detects any system
abnormality. e Alerts menu allows you to view and clear detected system faults. e date and time of the alert is noted.
Alert Listings
Short - e EVOLUTION
®
AG controller detected a short in the valve.
Overcurrent - e EVOLUTION
®
AG controller detected an over current in the valve. Over current occurs when a terminal or
combinations of terminals exceeded the recommended current draw rating.
Low Battery - e EVOLUTION
® AG controller detected no battery installed or the battery’s power is low. Once the Low Battery alert
is cleared, it will not display again unless a Factory Reset is performed or the newly installed battery runs low again.
Low A/C Power - e EVOLUTION® AG controller detected low or no A/C power.
Communication Error - e EVOLUTION® AG controller encountered a communication error with the output valves.
Clearing an Alert
You can clear an Alert individually or use the CLEAR ALL command to erase them all.
Step 1 – Press HELP/SETUP.
Step 2 – Use the Up or Down arrows to select the Alerts. Press SELECT .
Step 3 – Use the Up or Down arrows to select individual alerts or CLEAR ALL. Press SELECT .
ALERTS
CLEAR ALL
LOW BATTERY
Step 4 – Use the Up or Down arrows to conrm (Yes) or cancel (No). Press SELECT .
Contact Toro
Access Contact Toro to get the latest contact information.
Step 1 – Press HELP/SETUP.
Step 2 – Use the Up or Down arrows to select the Alerts. Press SELECT .
TORO
US +1(800)367-8676
TORO.COM/EVOLUTION
FOR GLOBAL SUPPORT
SEND EMAIL TO
EVOLUTION@TORO.COM

Toro EVOLUTION Specifications

General

Brand	Toro
Model	EVOLUTION
Category	Controller
Language	English