Toro EVOLUTION User Manual

27
Set Time/Date
Step 1 – Press the HELP/SETUP button.
Step 2 – Use the Up or Down arrows to navigate to SET TIME/DATE. Press SELECT .
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
Step 3 – Use the Up or Down arrows to select TIME or DATE. Navigate to the TIME or DATE parameters using the
Right arrow or SELECT .
Step 4 – Use the Up or Down arrows to modify the TIME’s Hour and Minutes or the DATE’s Month, Day and Year (Day,
Month and Year for International Format).
SET TIME/DATE
TIME 11:25AM
DATE 05/01/13
Step 5 – Press SELECT to save the changes.
Load From USB
Load from USB function is used to retrieve schedules saved in a USB Flash drive.
Note: Although many USB ash drives may function well with the EVOLUTION
®
AG controller, the following USB specications
are recommended:
• USB Version 2.0 Compliant
• 1–8 GB Memory Size (Smaller memory size will perform faster.)
• FAT32 File System with 1 Logical Partition
Step 1 – Plug your USB Flash drive into the EVOLUTION
®
AG controller’s USB port located at the back of the control panel.
See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
Step 3 – Use the Up or Down arrows to navigate to LOAD FROM USB. Press SELECT .
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
e EVOLUTION
®
AG controller will list all available schedule les. Use the Up or Down arrows to navigate to the
desired schedule. Use the Right arrow or SELECT to load the schedule.
Step 4 – Use the Up or Down arrow to select YES from the conrmation window.
LOAD FROM USB
ARE YOU SURE? YES

Toro EVOLUTION Specifications

General

Brand	Toro
Model	EVOLUTION
Category	Controller
Language	English