12
Using More Than One Active Schedule
e EVOLUTION
®
AG Controller has the ability to run up to three watering schedules. By default, only one schedule is active. Additional sched-
ules can be activated, see Advanced Functions section. Once activated, the additional schedules will appear under the Schedules Menu.
To edit a particular Schedule:
Step 1 – Press the
SCHEDULES button.
Step 2 – Use the Up or Down arrows to select the schedule you want to edit. Press SELECT .
Step 3 – Proceed with the Schedule Setup section.
Water Now
Water Now is used to manually activate a schedule, valve(s), or to test all valves.
Note: At any point, you can return to the previous menu by pressing the Left button or return to the main screen by
pressing the HOME button.
Manually Activate a Schedule
Step 1 – Press the WATER NOW button.
WATER NOW
SCHEDULE A
SCHEDULE B
VALVES
ALL VALVE TEST 02:00
06:02AM
MON
09/08
SCHEDULE A
01:VALVE1
00:02
HOME
Step 2 – Use the Up or Down arrows to navigate to SCHEDULE.
Press SELECT . Watering will begin.
e selected schedule will run and activate all assigned valves.
(For controllers with multiple active schedules only.)
Use the Up or Down arrows to select the Schedule you want to activate. Press SELECT .
Step 3 – From the Home Screen, the schedule can be advanced by pressing the Right arrow.
e Example shows valve 1 of schedule A is active with 2 minutes of runtime remaining.
Manually Activate a Specific Valve(s)
Step 1 – Press the WATER NOW button.
Step 2 – Use the Up or Down arrows to navigate to VALVES,
WATER NOW
WITH FERT PUMPS NO
VALVE1 00:15
VALVE2 OFF
VALVE3 FP1
VALVE4 FP2
WATER NOW
SCHEDULE A
SCHEDULE B
VALVES
ALL VALVE TEST 02:00
then press SELECT .
Step 3 – To activate or deactivate the fertilizer pumps during valve operation, use the Up or Down arrows to select WITH FERT
PUMPS menu, then press SELECT . Use the Up or Down arrows to set YES or NO, then press SELECT .
Note: When the WITH FERT PUMP selection is NO, the fertilizer program will not operate for the manual operation.
When the WITH FERT PUMPS selection is YES, then the fertilizer program for that valve will activate. To review the fertilizer
program for a valve, see ADVANCED menu selection for FERT PUMP DETAILS. If the fertilizer program calls for a longer
injection period than the manual watering time entered, the fertilizer program will stop for that valve at the end of the watering
time.
Step 4 – Use the Up or Down arrows to select the specic valve to activate.
WATER NOW
WITH FERT PUMPS NO
VALVE1 00:15
VALVE2 OFF
VALVE3 FP1
VALVE4 FP2
Press the Right arrow or SELECT .
Step 5 – Use the Up or Down arrows to assign the valve a runtime. Press SELECT .
e valve will activate until the specied runtime expires. A water drop icon is displayed to indicate that the valve is actively
watering.
Step 6 – Repeat Steps 3 and 4 to activate additional valves. Watering will occur in the order that the valves are entered.
To Next Page
Loading...
Need help?
General
