CancelingaParkedorRecoveryRegeneration
UsethePARKEDREGENCANCELorRECOVERYREGEN
CANCELsettingtocancelarunningparkedorrecovery
regenerationprocess.
1.AccesstheDPFRegenerationmenu,scroll
downtothePARKEDREGENoptionorthe
RECOVERYREGENoption.
2.PressthenextscreentocancelaParkedRegen
orcancelaRecoveryRegen.
StartingtheEngine
1.Sitontheoperator’sseatandfastentheseat
belt.
2.Ensurethattheparkingbrakeisengagedand
thePTOisdisengaged.
3.Preheattheenginebyrotatingthekeyswitchto
theON/PREHEATposition.
Note:Anautomatictimercontrolsthepreheat
for6seconds.
4.RotatethekeytotheSTARTposition,crankthe
enginefornolongerthan15seconds,andallow
thekeytoreturntotheON/PREHEATposition.
Note:Ifadditionalpreheatingisrequired,
turnthekeytotheOFFposition,thentothe
ON/PREHEATposition.Repeatthisprocessas
needed.
5.Movethethrottletoidlespeedorpartialthrottle
andruntheengineuntilitwarmsup.
ResettingthePTOFunction
Note:Ifyouleavetheoperator’sseatwhilethe
PTOswitchisintheONposition,themachinewill
automaticallyshutofftheengine.
PerformthefollowingtoresetthePTOfunction:
1.PushdownthePTOswitch.
2.Starttheengine;refertoStartingtheEngine
(page34).
3.PullupthePTOswitch.
ShuttingOfftheEngine
1.Usethethrottlecontroltolowertheengine
speed.
2.MovethePTOswitchtotheOFFposition.
3.RotatethekeyswitchtotheOFFpositionand
removethekeyfromtheswitch.
AfterOperation
AfterOperationSafety
GeneralSafety
•Shutofftheengine,removethekey,andwait
forallmovementtostopbeforeyouleavethe
operator’sposition,Allowthemachinetocool
beforeadjusting,servicing,cleaning,orstoringit.
•Cleangrassanddebrisfromthecuttingunits,
mufers,andenginecompartmenttohelpprevent
res.Cleanupoilorfuelspills.
•Ifthecuttingunitsareinthetransportposition,use
thepositivemechanicallock(ifavailable)before
youleavethemachineunattended.
•Allowtheenginetocoolbeforestoringthemachine
inanyenclosure.
•Removethekeyandshutoffthefuel(ifequipped)
beforestoringorhaulingthemachine.
•Neverstorethemachineorfuelcontainerwhere
thereisanopename,spark,orpilotlight,such
asonawaterheateroronotherappliances.
•Maintainandcleantheseatbelt(s)asnecessary
ServicingtheCuttingUnit
YoucanrotatethecuttingunitfromtheTRANSPORT
position(AinFigure30)totheSERVICEposition(Bin
Figure30).UsetheSERVICEpositiontomaintainthe
cuttingunitbladesorcleanunderneaththecutting
unit;refertoyourcuttingunitOperator’sManual.
34