TowingtheMachine
Ifitbecomesnecessarytotoworpushthemachine,
thetractionpumpmustbesettobypasshydraulic
uid.Movethemachineataspeedbelow4.8kph
(3mph),andforaveryshortdistance.
Important:Iftowinglimitsareexceeded,severe
damagetothehydraulicpumpmayoccur.
Ifthemachineneedstobemovedmorethana
shortdistance,themachineshouldbetransported
onatrailer.
1.Accessthebypassvalvefromunderthe
machine.
g297087
Figure36
1.Tractionpump2.Bypassvalve
2.Usean18mm(11/16inch)box-endwrenchto
loosenthebypassvalve,thenopenthevalve3
revolutionsmaximum.
Important:Donotstartorruntheengine
whenthevalveissettothebypassposition.
3.Aftertowingandbeforestartingtheengine,
tightenthebypassvalveto20N·m(15ft-lb).
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
•Removethekeybeforestoringorhaulingthe
machine.
37