Toro groundsmaster 455-D User Manual

11
Before Operating
Note: Determine the left and right sides of the machine from the normal operating position.
Description Qty. Use
Ignition key
Parts catalog
Commercial product setup card
1
1
1
Operator’s Manual 2 Read before operating the machine.
Registration card 1 Fill out and return to Toro.
Before servicing or making adjustments to the
machine, stop engine and remove key from the
switch.
Caution
Checking the Engine Oil
Crankcase capacity is 5.3 U.S. quarts (5.1 l) with filter.
1. Park machine on a level surface. Release hood latch and
open hood.
2. Remove dipstick from tube cap (Fig. 1), wipe clean and
reinstall dipstick into tube cap. Pull it out again and
check oil level on dipstick: Oil level must always be in
notch area on dipstick.
1
Figure 1
1. Dipstick/tube cap
3. If oil level is low, remove tube cap and add API
15W–40 CF, CF–4, or CG–4 oil until level reaches top
of notch on dipstick. DO NOT OVERFILL.
4. Install oil tube cap.
5. Close hood and secure latch.
Checking the Cooling System
Capacity of system is 3.5 gallons (13.3 l)
1. Park machine on a level surface. Release hood latch and
open hood.
2. Check coolant level. Coolant level should be up to or
above mounting tabs on degasser tank, when engine
is cold (Fig. 2).
1
2
Figure 2
1. Degasser tank 2. Degasser tank cap
3. If coolant is low, remove degasser tank cap (Fig. 2) and
add a 50/50 mixture of water and Peugeot
recommended anti-freeze (Toro Part No. 93-7213). Do
not use water only or alcohol/methanol base
coolants.
4. Install degasser tank cap.
5. Close hood and secure latch.
Filling the Fuel Tank
1. Park machine on a level surface. Release hood latch and
open hood.
2. Remove fuel tank cap (Fig. 3).

Toro groundsmaster 455-D Specifications

General

Brand	Toro
Model	groundsmaster 455-D
Category	Lawn Mower
Language	English