Toro Workman MDX User Manual

4
Burnishing the Brakes
No Parts Required
Procedure
T o ensure optimum performance of the brake system,
burnish (break-in) the brakes before use.
1. Bring the machine up to full speed, apply the
brakes to rapidly stop the machine without
locking up the tires.
2. Repeat this procedure 10 times, waiting 1 minute
between stops, to avoid overheating the brakes.
Important: This procedure is most effective
if the machine is loaded with 227 kg (500 lb).
5
Reading the Manual and
V iewing the Setup Material
Parts needed for this procedure:
1
Operator's Manual
1 Engine owner's manual
1 Registration card
1 Predelivery Inspection Form
1
Certicate of Quality
2 Key
Procedure
• Read the Operator's Manual and the engine
owner's manual.
• Fill out the registration card.
• Complete the Predelivery Inspection Form .
• Review the Certicate of Quality .
1 1

Toro Workman MDX Specifications

General

Brand	Toro
Model	Workman MDX
Category	Utility Vehicle
Language	English