Learning about the remote control
Tile buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote
Control functional key chart" on pages 13 -14.
POWERturns the TV on and off
SLEEPallows access to the automatic TV shut-offfunction (page 46)
LIGI-ITThe first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
ChannelNumbers (0-9, 1OO)allow direct access to channels (page 25)
MODEcycles through the six device modes: _, CABLE/SAT, VCR,
DVD, AUDIO 1, and AUDIO2. The mode indicator light will
remain lit for 10 seconds (page 15).
PICSIZEcycles through the three picture formats: Normal, Letterbox
and Compression (page 31)
FAVORITEallows access to the Multi-Window function (page 34)
MENUallows access to on-screen programming menus (page 22)
ENTERsets programming menu information (page 22)
iV • _ select or adjust programming menus (page 22)
(FAY)• _ cyclesthrough favorite channels (page 28)
Cl-Il_' cycles through programmed channels (page 25)
VOLAV adjusts the volume level
EXITexits the programming menus (page 22)
INPUTselects the video input source (page 44)
MUTEmutes the sound (page 47)
RECALLdisplays on-screen information (page 51)
Cl-IRTNreturns to the last viewed channels (page 28)
PIPcl-IAv selects the PiP/double-window channel (page 32)
PIPturns the PiP/double-window feature on and off (page 32)
MULTIallows access to multi-window function (page 34)
STILLfreezes the PiP/double-window picture (page 33)
SwAPswitches the main and sub-pictures (page 33)
LOCATEchanges the display position of the small picture (page 33)
SOURCEselects the PiP/double-window picture source (page 32)
21
To Next Page
Loading...
Need help?
General