Connecting a cable converter box
This connection allows you to watch basic and premium cable
channels.
To use the TV's features, select ANT- 1. To view premium channels,
select ANT-2, tune the TV to channel 3 or 4 (whichever channel is
vacant in your area), and use the converter box to change channels.
You will need:
• two coaxial cables
TV From Cable
I
Note:
When you use a converter box with your TK,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To use the TV's features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
You will need:
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable (one S-video cable for an S-VHS VCR)
TV
From Cable
Note:
Ifyou have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
ffyou have an S-VHS VCR, use an S-video
cable (in the S-video jacks) instead of a
regular video cable. Do not connect a regular
video cable and an S-video cable to Video- ]
(or Video-2) at the same time.
When you use a converter box with your TK,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
Stereo VCR
6
To Next Page
Loading...
Need help?
General