2. Press • or • to display the CH LOCK menu.
3.111 a
®@®®@®
LOCKS
V-CHIP
ENABLE BLOCKING ON
TV RATING
MP_ RAT I NG
VIDEO LOCK
FRONT PANEL LOCK 33 0
NEW PIN CODE 0 0
CLEAR Ak_ v CABL_ii
,,)
®®®®@0
LOCKS
V-CHIP
ENABLE BLOCKING ON
TV RAT I NG I*
MPAA RATI NG
).
, , ).
CH INPUT II;l{
VIDEO LOCK 12 18 33
FRONT PANEL LOCK
NEW PIN CODE 0 00 00
TV CAFBI [{
CLEAR ALL )'
4. Repeat step 3 for other channels.
5. Otherwise, to clear all locked channels at once, press • or • to
highlight CLEAR ALL, then press • or •.
0@®®®0
LOCKS
V-CHIP
ENABLE BLOCK I NG ON
TV RAT I NG 1'
MPAA RATING 1'
CHI' I NPUT XIC_
VIDEO LOCK 0 0
FRONT PANEL LOCK 00 00 0
NBN PIN CODE
Locking video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream HD 1, ColorStream HD2)
and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press • or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream HD1
and HD2.
VIDEO+ : Locks Video 1, Video 2, Video 3, ColorStream,
HDI/HD2, and channels 3 and 4. This option
should be used if you use the antenna terminal to play
a video tape.
OFF : Unlocks all video input sources.
®@®®@0
@ LOCKS
V-CHIP
ENABLE BLOCK I NG ON
TV RAT I NG I*
MPAA RATI NG ).
BLOCKING OPTION 1'
NEW PIN CODE
Using the front panel lock feature
W
39