Selecting the video input source
Press INPUT on the remote control or TV/VIDEO on the TV to view a
signal coming from another device connected to your TV, such as a VCR
or video disc player (see illustrations below). You can select ANT 1,
VIDEO 1,VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream
HD2, or ANT 2 depending on which input jacks are used for
connecting the devices (see "Connecting your TV" on page 5.)
SOURCE SELECTION
0: ANT 1
1:VIDEO
2:VIDEO _
3:VIDEO 3
4: ColorStream HD1
5:ColorStream HD2
6: ANT 2
0-6:TO SELECT
ANT 1
VIDEO 1
VIDEO 2
VIDEO 3
CoIorStream HDt
CoIorStream HD2
ANT 2
PressingINPUTon theremotecontrol PressingTV/VIDEOonthe TV
the currentsignalsource chan__sthecurrentsignalsource
(pressINPUTagainor 0-6tochang_
Labeling the video input sources
Tile video label feature allows you to label each input source for your
TV from the following preset list of labels:
- : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then press • or • until the CUSTOM menu
appears.
2. Press • or • to highlight VIDEO LABEL.
®®®®@®
CUSTOM
TIMER 000
CC og_
FAVORITE CH1
FAVORITE CH2
3. Press • or • to display the VIDEO LABEL menu.
4. Press • or • to highlight the video source you want to label.
5. Press • or • to select the desired label for that input source.
®@0®®®
_ CUSTOM
ColorStream HD1
ColorStream HD2
CUSTOM MENU P
Note:
• WhenColorStreamHD 1 or HD 2 is
selected, the video OUTjack does not
output a signal Toreceive a video OUT
signal, usea videoorS-video IN
connectioninsteadof the Co/orStream
connection.
• ffyou selectCo/orStreamHD 1or HD2
while the PIP/Double-Window is active, the
window wi//close.
43HX71 TV front panel
\
CHA _1
!
CHV
TV/VIDEO
53HX71
MENU ;- EXIT TVNIDEOT0UCHFOCUS
voL voL
TV/VlDEO
_"r_-_ e_a_ I
MENU
AT< I,_
-- EXIT
INPUT
.
Finish labeling the other video sources as desired. To return to the
previous menu, press • or • to highlight CUSTOM MENU,
and then press • or •.
7. To exit the menu, press EXIT.
To Next Page
Loading...
Need help?
General