111
4400 Series Installation and Operation Manual – 64527-008
Appendix B – Command
4400
three digit number composed of the Block and Item number. E.g. Parameter 003 is the UPS serial Number. The Short Descriptions is the labeling
shown in the UPS display. All parameters can viewed with RemotEye 4.
Blk Item Long Description
Short
Description
Units
Permiissions
Remark
User Admin
0 01 UPS Manufacturer Manufacturer R R
0 02 UPS Typeform Typeform R R See Toshiba UPS Typeform document.
0 03 UPS Serial Number Serial No. R R YYYYMMNNNNN Where
YYYY is four digits year
MM is two digits month
NNNNN is ve digit number
0 08 UPS System Name System Name R R/W Such as Plant3, Upstair...
0 09 UPS Attached Devices Attached Device R R/W
0 10 UPS Installation Date Installed Date R R/W YYYYMMDD
1 01 Input Line to Line Voltage (AB) Voltage (AB) V R R
1 02 Input Line to Line Voltage (BC) Voltage (BC) V R R
1 03 Input Line to Line Voltage (CA) Voltage (CA) V R R
1 04 Input Line to Neutral Voltage
(AN)
Voltage (AN) V R R
1 05 Input Line to Neutral Voltage
(BN)
Voltage (BN) V R R
1 06 Input Line to Neutral Voltage
(CN)
Voltage (CN) V R R
1 07 Input Current % (A) Current % (A) % R R
1 08 Input Current % (B) Current % (B) % R R
1 09 Input Current % (C) Current % (C) % R R
1 10 Input Frequency Frequency Hz R R 600 for 60.0 Hz, 500 for 50.0 Hz. UPS will send you one
decimal point and format it according to decimal points
1 21 Input Voltage in % (A) Voltage (A) % % R R
1 22 Input Voltage in % (B) Voltage (B) % % R R
1 23 Input Voltage in % (C) Voltage © % % R R
To Next Page
Loading...
Need help?
General