3.13 Hard Disk Test 3 Tests and Diagnostics
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 3-27
3.13 Hard Disk Test
To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter, and
follow the directions on the screen.
CAUTION: The contents of the hard disk drive will be erased when the subtest 02, 03,
04, 06, 08 or 09 is executed. These subtests should not be executed except
when absolutely necessary. If you execute these subtests, prepare other hard
disk drive and use it for the tests.
1. The following message appears for the error dump operation when a data compare error is
detected. Select 1 or 2.
Data compare error dump (1:no, 2:yes)
2. The following message appears for whether or not the HDD status is displayed on the
screen. The HDC status is described in section 3.19. Select 1 or 2.
Detail status display (1:no, 2:yes)