4.24 Fluorescent lamp 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-69
4
4.24 Fluorescent lamp
This system uses the following LCD module.
Type lamps Part No. Supplier Section
15.4 inch (W-XGA) 2
G33C0002A110 Samsung 4.24.1
1
G33C0002S110 Samsung 4.24.2
15.4 inch (W-XGA)
1
G33C0002T110 Chemei 4.24.3
NOTE: - When working with a LCD module, always use a flat, grounded table.
- Handle the backlight unit in the environment without dust, such as on the clean
bench. Keep the worktable free from any screws or other material that may
scratch the LCD surface.
- Use an anti-static or protective sheet.
- When replacing the FL unit, cover with a finger protector or similar to prevent
dirtying or scratching the LCD panel.
- Take care when handling the lamp. Excessive force may break the lamp.
- Ensure always that the power of the LCD module is turned off before
connecting or disconnecting cables and connectors.
To Next Page
Loading...
Need help?
General