Toshiba QOSMIO F20 User Manual

4.5 MDC 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-17
4.5 MDC
Removing the MDC
The following describes the procedure for removing the MDC (See Figure 4-8).
1. Remove the following screws fixing the MDC and pull the MDC straight up from the
connector CN3010 on the system board.
? M2?4B S-THIN HEAD x2
2. Turn over the MDC and remove the Modem cable from the MDC.
Figure 4-8 Removing the MDC
Installing the MDC
The following describes the procedure for installing the MDC (See Figure 4-8).
1. Connect the Modem cable to the MDC.
2. Connect the MDC to the connector CN3010 on the system board.
3. Secure the MDC with the following screws.
? M2?4B S-THIN HEAD x2
MDC
M2?4B S-THIN HEAD
Modem cable
CN3010

Toshiba QOSMIO F20 Specifications

General

Brand	Toshiba
Model	QOSMIO F20
Category	Laptop
Language	English