4.15 TV tuner module 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-43
Installing the TV tuner module
The following describes the procedure for installing the TV tuner module (See Figure 4-31).
1. Insert the TV tuner module terminals slantwise into the connector CN2400 on the
system board and secure it with the following screws.
? M2?4B S-THIN HEAD x2
2. Connect the TV antenna coaxial cable to the connector on the TV tuner module.
3. Connect the TV tuner cable to the connector on the TV tuner module.
To Next Page
Loading...
Need help?
General