4.22 Hinge 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-65
Installing the Hinge on the middle frame
The following describes the procedure for installing hinge on the middle frame (See Figure
4-49).
1. Turn up the insulator and install the hinge (left in the figure) on the middle frame.
2. Secure the hinge with the following screws and stick the aluminum tape in place.
? M2.5?6S TAPPING x2
3. Install the hinge (right in the figure) on the middle frame and secure it with the
following screws.
? M2.5?6S TAPPING x2
To Next Page
Loading...
Need help?
General