-155-
TP-LINK # sys import config
Server address: [192.168.1.101]
Username: [admin]
Password: [admin]
File name: [config.bin]
Import the configuration file.
The steps are as the above
item shown.
Try to get the configuration file < config.bin > ...
Get configuration file < config bin > succeed, file size is 7104 bytes.
TP-LINK > sys show
CPU Used Rate: 1%
View the system information.
The current CPU Usage of
the system will display.
TP-LINK # sys update
Server address: [192.168.1.101]
Username: [admin]
Password: [admin]
File name: [update.bin]
Upgrade the firmware.
Try to get the update file < update.bin > ...
Get update file < update bin > succeed, file size is 2298608 bytes.
5.4.4 user
The user command is used to query or modify the user name and password of CLI. In User EXEC
Mode, you can only modify the password of the User level users while the username cannot be
modified since the User Level user and Admin Level user share the same username. In Privileged
EXEC Mode, you can modify both the user name and password of Admin-Level user.
TP-LINK > user get
Username: admin
Password: admin
Query the user name and
password of the current
Guest.
To Next Page
Loading...
Need help?
General
